HyperLib 1997 Winter - Disc 1/HYPERLIB-1997-Winter-CD1.ISO.7z/HYPERLIB-1997-Winter-CD1.ISO/オンラインウェア/COM/LineShare 3.3.1 folder.sit/LineShare 3.3.1 folder/LineShare 3.3.1/LineShare Scripts/Motrolla Fax1&ARA&Data

Text File | 1995-02-24 | 8KB | 408 lines

! Version 3.1.4
!
!$ Use this script with Motorolla Power 28.8 modems
!$ Supports: fax class 1, ARA and regular data incoming calls.

^2 Speaker On:        = Enum("Never" = "0","During Connect" = "1", "Always"="2") "1"
^3 Speaker Volume:       = Enum("Low"="1","Medium"="2","High"="3") "2"
^4 Answer On:         = Enum("1 Ring"="1","2 Rings"="2","3 Rings"="3","5 Rings"="5","7 Rings"="7") "2"
^5 Port Speed:        = Enum("9600","19200","38400","57600") "38400"
^6 Handshake wires:   = Bool("Both"="¥Q3&D0","CTS only"="¥Q2&D2") "¥Q2&D2"
! ------------------------------------------
! Resetting the modem:
! ------------------------------------------
@Hangup
  SetTries 2
  Flush
  HsReset 0,0,17,19,0,0
  DtrSet
!
! Try to catch the "OK" answer, use the Escape seq and DTR transitions
! to enter the command mode
!
@Label 1
  matchclr
  matchstr 1 2 "OK¥r¥n"
  write "ATH0&F¥r"
  matchread 20
  ChrDelay 1
  Write "+++"
  ChrDelay 0
  DtrClear
  SBreak
  DtrSet
!
  DecTries
  IfTries 0 1
!
! OSErr -6019 "Modem error - the modem is not responding"
!
  exit -6019
@Label 2
  write "AT+FCLASS=0¥r"
  Jsr 100
  write "AT+FAA=0¥r"
  Jsr 100
  exit 0

! ------------------------------------------
!    Receiving incoming calls
! ------------------------------------------
@ANSWER
!
! Set the modem preferred speed first
!
  SerReset Val("^5"),0,8,1
  Jsr 80

@Label 10
!
! Set the common options
  Jsr 70
!
! Set the communication options:
! ･ ¥N0: Normal connection (for ARA)
! ･ ¥V2:  report connection speed
!
  Write "AT¥¥N0¥¥V2¥r"
  Jsr 100
!
! Set Fax mode
!
  Write "AT+FCLASS=1¥r"
  Jsr 100
  Write "AT+FAA=1¥r"
  Jsr 100
!
! Tell the modem to determine the type of the incoming call
! Fetch the tube after ^4 rings
!
  Write "ATS0=^4V0¥r"
  Jsr 110
!
! Everything is ready - let's sit and wait for a call
! We'll wait for 2 minutes, then reinitiate the modem
!
  Note "Waiting for a fax/ARA/data callﾉ"
  MatchClr
  matchstr 02 40 "10¥r"
  MatchStr 03 41 "11¥r"
  MatchStr 04 42 "22¥r"
  MatchStr 05 43 "12¥r"
  MatchStr 06 44 "23¥r"
  MatchStr 07 45 "24¥r"
  MatchStr 08 46 "25¥r"
  MatchStr 09 47 "26¥r"
  MatchStr 10 48 "27¥r"
  MatchStr 11 49 "28¥r"
  MatchStr 12 50 "29¥r"
  MatchStr 13 51 "30¥r"

  MatchStr 25 19 "17¥r"
  matchstr 26 18 "2¥r"
  matchstr 27 57 "1¥r"
  matchstr 28 17 "3¥r"
  matchstr 29 17 "8¥r"
  matchstr 30 17 "7¥r"
@Label 16
  Matchread 1200
@Label 17
  Note "Tuning againﾉ"
  Write "ATV1¥r"
  Jsr 100
  Jump 10
@Label 18
  Note "Ringﾉ"
  jump 16
@Label 19
  Note "Fax tones detectedﾉ"
! IfStr 7 16 "V"
  SetSpeed 19200
  Jump 16

!
! Data connection has been established (we read "CONNECT")
! Put the "CONNECT" back to the buffer and attach the "Data" subPort
! if it was an incoming call, put the "RING" before the "CONNECT"
!
@Label 20
  IfOpen "Data" 21
  Jump 30
@Label 21
  IfOpen "ARA" 22
  Jump 35
@Label 22
  Note "Waiting for an ARA frame"
  MatchClr
  MatchStr 1 23 "^$¥r"
  MatchStr 2 28 "¥08¥01¥03¥14¥04¥03¥00¥08¥250¥16¥03"
  MatchStr 3 29 "¥01¥27¥02¥29¥01¥02¥01¥06"
  MatchRead 60
  Jump 24
@Label 23
  QueueInput "^$¥r"
@Label 24
  Note "Non-ARA call"
  Jump 35

@Label 28
  Note "ARA 1.0 call"
  Jump 30
@Label 29
  Note "ARA 2.0 call"
  Jump 30

@Label 30
  QueueInput "¥r¥nCARRIER ^B¥r¥n"
  QueueInput "¥r¥nRING¥r¥n"
  Attach "ARA" (DTR)

@Label 35
  GetSReg C "DATA" 4
  QueueInput "¥r^CCONNECT ^B¥r^C"
  ifOriginate 36
  QueueInput "¥r^CRING¥r^C"
@Label 36
  Attach "Data" (DTR,Escape,Break)


!
! Converting numeric responses into the verbal
!
@Label 40
  SetVar B "2400"
  Jump 20
@Label 41
  SetVar B "4800"
  Jump 20
@Label 42
  SetVar B "7200"
  Jump 20
@Label 43
  SetVar B "9600"
  Jump 20
@Label 44
  SetVar B "12000"
  Jump 20
@Label 45
  SetVar B "14400"
  Jump 20
@Label 46
  SetVar B "16800"
  Jump 20
@Label 47
  SetVar B "19200"
  Jump 20
@Label 48
  SetVar B "21600"
  Jump 20
@Label 49
  SetVar B "24000"
  Jump 20
@Label 50
  SetVar B "26400"
  Jump 20
@Label 51
  SetVar B "28800"
  Jump 20

! ------------------------------------------
! Originating a call through the "ARA" subport
! ------------------------------------------
@ORIGINATE "ARA"
  SerReset Val("^5"),0,8,1
  Jsr 80
!
! Set the common options
!
  Jsr 70
!
! Set the Data mode:
! ･ ¥N0:Normal connection (no compression, correction - for ARA)
! ･ﾊS7:  time-out (90 sec) for long-distance calls
! ･ ¥V2: report connection rate
!
  Write "AT¥¥N0S7=90¥¥V2¥r"
  Jsr 100
!
! Emit the ARA script commands ("Xnn")
  Jsr 60
!
! Prepare to receive all error result codes, dial the number
!
  Jsr 90
  MatchStr 1 55 "¥r¥nCONNECT ^$¥r¥n"
  MatchRead 1000
  Write "¥r"
  Exit -6019
@Label 55
  QueueInput "¥r¥nCARRIER ^$¥r¥n"
  Attach "ARA" (DTR)

! ------------------------------------------
! Originating a call through the "DATA" subport
! ------------------------------------------
@ORIGINATE "Data"
  SerReset Val("^5"),0,8,1
  Jsr 80
!
! Set the common options
!
  Jsr 70
!
! Set the Data mode:
! ･ ¥N7: Auto-reliable
! ･ﾊS7:  time-out (90 sec) for long-distance calls
! ･ﾊ¥V0: report port speed
!
  Write "AT¥¥N7S7=90¥¥V0¥r"
  Jsr 100
!
! Emit the Data commands
  Jsr 60
!
! Prepare to receive all error result codes, dial the number
!
  Jsr 90
  MatchStr 1 56 "¥r¥nCONNECT "
  MatchRead 1000
  Write "¥r"
  Exit -6019
@Label 56
  QueueInput "¥r¥nCONNECT "
  Attach "Data" (DTR,Escape,Break)

! ------------------------------------------
! Originating a call through the "Fax" subPort
! ------------------------------------------
@ORIGINATE "Fax"
!
! Set the "Fax" speed
!
  SerReset 19200,0,8,1
  Jsr 80
!
! Set the common options
!
  Jsr 70
!
! Set the Fax mode
! ¥Q1: Xon/Xoff handshake
! &S0: DSR always on
!
  Write "AT&S0¥¥Q1+FCLASS=1¥r"
  Jsr 100
!
! Now emit all commands that the application has sent to that port,
! except "FCLASS", etc
!
  EmitClear "+FCLASS","V","E"
  Jsr 60
  Write "ATV0¥r"
  Jsr 110
!
! Prepare to receive all error result codes, dial the number
!
  MatchClr
  MatchStr 01 57 "1¥r"
  MatchStr 13 93 "3¥r"
  MatchStr 14 94 "8¥r"
  MatchStr 15 92 "7¥r"
  Write "ATD^1¥r"
  HsReset *
  MatchRead 900
  Write "¥r"
  Exit -6019

!
! Fax connection has been established (we read "FAX")
! Put the +FCON back to the buffer,
! if it was an incoming call, put the "RING" before the "+FCON"
! Attach the "Fax" subPort
!
@Label 57
  QueueInput "1¥r"
! IfStr 7 58 "V"
  SetSpeed 19200
@Label 58
  ifOriginate 59
  QueueInput "2¥r2¥r"
@Label 59
  Attach "Fax" (Reset(2400),IdleLimit=30)

!
! This section emits all modem commands sent from the client application
! For each set of commands the "OK" answer is awaited
!
@Label 60
  EmitStart
@Label 61
  EmitCommand 62
  Jsr 100
  Jump 61
@Label 62
  return
!
! This section initiates the modem before ANSWER and ORIGINATEs:
! extended responses + connect at the highest rate + speaker control +
! reset on Dtr drop + DCD valid
! Verbal responses mode, no echo
!
@Label 70
  Write "ATX4M^2L^3^6&C1V1E0¥r"
  Jsr 100
  return

!
! This section syncronize the modem after the serial port speed switching
!
@Label 80
  ChrDelay 1
  Write "AT¥r"
  ChrDelay 0
  Jsr 100
  return
!
! Prepare to receive error result codes, send the dialing command and
! set the user's handshake mode
!
@Label 90
  MatchClr
  MatchStr 2 91 "NO DIALTONE¥r¥n"
  MatchStr 3 92 "BUSY¥r¥n"
  MatchStr 4 93 "NO CARRIER¥r¥n"
  MatchStr 5 94 "NO ANSWER¥r¥n"
  Write "ATD^1¥r"
  HsReset *
  return
@Label 91
  exit -6020
@Label 92
  exit -6022
@Label 93
  exit -6021
@Label 94
  exit -6023
!
! Processing the AT command:
! OK -> proceed
! ERROR or TimeOut ->exit -6019
! It can be called AFTER the "Write" command, since LineShare buffers input
!
@Label 100
  MatchClr
  MatchStr 1 103 "¥r¥nOK¥r¥n"
  MatchStr 2 102 "¥r¥nERROR¥r¥n"
@Label 101
  MatchRead 20
@Label 102
  Exit -6019
@Label 103
  return

@Label 110
  MatchClr
  MatchStr 1 103 "0¥r"
  MatchStr 2 102 "4¥r"
  Jump 101